API 6A Hydraulic Flat Gate Valve

Open stem and Non rising stem
Manual and drive operation

Quantity:
Availability:





Inquire Add to Basket

gate valve flat gate valve hydraulic gate valve API 6A Gate Valve api 6a hydraulic gate valve api 6a wellhead gate valve

Product Description

Product Parameters

The flat gate valve is suitable for the key high-pressure (5000PSI ~ 15000PSI) service application on wellhead equipment, Christmas tree and manifold. There are two types of open stem and Non rising stem. Reliable performance. Forged valve body / bonnet; low operating torque; metal to metal high pressure valve body / bonnet seal; metal to metal seat / body (wave spring pre tightening design), seat / gate seal; no rubber material; metal to metal backseat seal can be pressed no matter where the gate is; there is a fitting in the bonnet above the back seat; the gate guide rod seals the body lubricant and protects it Ram surface; manual and drive operation.

Nominal size	1-13 / 16" ~ 7-1 / 16"
Rated pressure	2000psi ~ 20000psi
Temperature	– 46 ° C to + 121 ° C (Lu grade)
Material grade	AA, BB, CC, DD, EE, FF, HH
Specification level	psl1-4
Performance level	pr1-2
Executive standard	API Spec 6A & amp; NACE Mr 0175
Operation mode	manual, pneumatic, electric and hydraulic