Hydrocyclone Desander

can manufacture Hydrocyclone Desander with the sizes of 8″, 10″, 12″ and 14″ for oil drilling mud system and 14″~20″ Hydrocyclone for Desanders for micro-tunneling..

Quantity:
Availability:





Inquire Add to Basket

hydrocyclone desander cone hydrocyclone for desander 10 hydrocyclone desander api desander desilter hydrocyclone api hydrocyclone desander automatic hydrocyclone desander

Product Description

Features and Benefits

Desander Parameters

Desanders are solid controls equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. so it is called Hydrocyclone Desander or Desander Unit. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers. Normally the solids diameter for desander to be separated would be 45~74μm.

we can manufacture Hydrocyclone with the sizes of 8″, 10″, 12″ and 14″ for Desander for oil drilling mud system and 14″~20″ Hydrocyclone for Desanders for micro-tunneling separation plant. And Cyclone Desanders and Desanders without bottom shaker in different capacities can also be provided.

1. Design: Adopt ANSYS limited element analysis to optimize the structure.
2. Material: Use Q235B from BAOSTEEL for body, and High strength compound rubber material used to reduce shock.
3. Vibration motor: Italy OLI /American Martin, or according to customer requirement.
4. Electrical control system: Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider
5. Treatment: Grinding, Abrasive blasting, Epoxy zinc rich primer, Intermediate painting with epoxy micaceous iron, and Finish painting with polyurethane
6. Hydracyclone cone: Made of wearing-resist polyurethane and in the structure similar to Derrick design.
7. Inlet and outlet: Fast joint connection


Model	XLZJ101-1S	XLZJ101-2S	XLCSQ250-15	XLC5Q250-25
Capacity	≤120m'/h(528GPM)	≤240m/h(1056GPM)	≤120m'/h(528GPM)	≤240m/h(1056GPM)
D-SANDER Cones	1x10"(250mm)	2x10"(250mm)	1x10"(250mm)	2x10"(250mm)
Matching Pump	30kw (40hp)	55kw (73hp)	30KW(40hp)	55kw (73hp)
Rated Motors Output	0.45kw(0.6hp)x2(OL1)	.45kw(0.6hp)x2(OL1)	0.4kw(0.53hp)x1(OL1)	0.4kw(0.53hp)x1(OL1)
G-Force	≦7.0 Gs	≤7.0 Gs	≤6.5 Gs	≤6.5 Gs
Motion Trail	linear type	linear type	Circular vibration type
Operating Temperature	30°C (86°F)
Design Range	(40-50%c) (-40-122F)
Noise Data	75-85 dBA	75-85 dBA	75-85 dBA	75-85 dBA
Screen Size	585x1165 mm	585x1165 mm	600X1600 mm	600X1600 mm
Screen Qty	1pc	1pc	1pc	1pc
Screen Area	0.70㎡(7.8ft3)	0.70㎡(7.8ft?)	1 ㎡ (11ft2)	1 ㎡(11f8)
Screen Mesh/Microns	API 120/150/175	API 120/150/175	API 120/150/175	API 120/150/175
Weight(kg)	750	950	750	780
Dimension(mm)	1465x1510x2390	1450x1390x2320	1465x1510x2390	1465x1510x2390