Copper Wire Xlpe Cables Esp Power Cable

Product Description

Cable’s Cross Section Chart

Specification and Parameters

Index of Performance

EPDM insulation, Inner lead sheath, Fluoropolymer tape and synthetic braid covered completely over the lead

sheath, Outer nitrile rubber(NBR) jacket, Full galvanized steel (or stainless steel or Monel) tape armour.

Performing Criterion:

GB/T16750、IEEE1017.2、IEEE1018、IEEE1019、API RP11S5、API RP11S61

Application Range:

This cable is applicable for use in Electricity Submersible Pump Units with rated voltage less than 3kV or 6kV.

The maximum permissible conductor temperature is 205 ℃ (400 ℉ ). The cable has the excellent ability of

oil-resistance, heat-resistance and corrosion-resistance.

Phase	Cross Section mm2	Conductor Diameter mm	DC Resistance at 20℃ ≤ Ω/km Untinned Tinned		Insulation Thickness mm 3kV 6kV		Jacket Thickness mm InnerOuter		Overall Size and Weight 3kV 6kV mm kg/km mm kg/km
3	16	1/4.62	1.15	1.16	2.0	2.3	1.0	2.0	32	2082	33	2293
3	20	1/5.19	0.84	0.86	2.0	2.3	1.0	2.0	34	2399	35	2577
3	33	1/6.54	0.54	0.56	2.0	2.3	1.0	2.0	36	3120	37	3176
3	42	1/7.35	0.43	0.44	2.0	2.3	1.0	2.0	38	3310	39	3566

Cross Section		Conductor Diameter mm	3kV Insulation Resistance M Ω ·km	3kV Leakage Current at 15.6℃ μA/km/kV	6kV Insulation Resistance M Ω ·km	6kV Leakage Current μA/km/kV	DC Voltage Test For 5 Minutes
mm2	AWG						3kV	6kV
16	5	4.62	1484	0.7	1692	0.607	27kV 35kV
20	4	5.19	1352	0.775	1548	0.656
33	2	6.54	1012	0.984	1170	0.853
42	1	7.35	919	1.083	1063	0.951