Esp Power Cable Oil Field Cables Submersible Pump Power Cable

Product Description

Cable’s Cross Section Chart

Specification and Parameters

Index of Performance

Compound insulation with polyimide film and EPDM rubber, Inner lead sheath, Fluoropolymer tape and synthetic

braid covered completely over the lead sheath, Outer nitrile rubber(NBR) jacket, Full galvanized steel (or stainless

steel or Monel) tape armour.

Performing Criterion:

GB/T16750、IEEE1017.2、IEEE1018、IEEE1019、API RP11S5、API RP11S6

Application Range:

This cable is applicable for use in Electricity Submersible Pump Units with rated voltage less than 3kV or 6kV.

The permissible working temperature is 150 ℃ (302 ℉ ). The cable has the excellent ability of oil-resistance,

heat-resistance and corrosion-resistance.

Phase	Cross Section mm2	Conductor Diameter mm	DC Resistance at 20℃ ≤ Ω/km	Insulation Thickness mm 3kV 6kV		Jacket Thickness mm		Overall Size and Weight 3kV 6kV mm kg/km mm kg/km
						Inner	Outer
3 3 3 3	16 20 33 42	1/4.62 1/5.19 1/6.54 1/7.35	1.15 0.84 0.54 0.43	0.8 0.8 0.8 0.8	1.0 1.0 1.0 1.0	1.0 1.0 1.0 1.0	2.0 2.0 2.0 2.0	32 34 36 38	2310 2678 3055 3560	34 36 38 40	2491 3002 3310 3766

Cross Section		Conductor Diameter mm	3kV Insulation Resistance M Ω ·km	3kV Leakage Current at 15.6℃ μA/km/kV	6kV Insulation Resistance M Ω ·km	6kV Leakage Current μA/km/kV	DC Voltage Test For 5 Minutes
mm2	AWG						3kV	6kV
16	5	4.62	5112	0.240	5978	0.20
20	4	5.19	4660	0.270	5431	0.23	27kV	35kV
33	2	6.54	3905	0.344	4516	0.284